Rollco Front Left Brake Caliper Mazda MX5 NA (Mk1) NB (Mk2)

Replace your front left brake caliper with this good-quality aftermarket part from Rollco. Brakes can seize when the piston corrodes and gets stuck in the bore of the caliper. Seals can also fail, causing the caliper to leak and severely impair braking performance. Replacing the seals and pistons is difficult and time-consuming, meaning swapping out the calipers for new units is the most cost-effective solution. Please note fits all cars from 1989-2005 cars with either 235mm front & 231mm rear or 255mm front & 251mm rear brakes. Does not fit larger sport brakes. If you have a Mk1 1.6, you can’t swap these calipers one at a time. They’re made for the 1.8 bolt pattern, so the carriers have to be swapped left to right to fit. That only works if you change both calipers at the same time. Features Brand-new caliper Manufactured to the highest OE quality standards Two years warranty 100% end-of-line tested